
Torsten: By the way, anyone reading this and thinking: For God’s sake, why is this guy jumping from Auschwitz to chain care? Well, I already told you somewhere else that my wife comes from Volgograd, the former Stalingrad, and that about – when was it, 2016 or 17 – I visited her in her home town, and in the history museum where they tell the story of the battle I saw an original BMW with the same logo and the same emblem, with the same – what’s the badge called, what’s the right word for it? – as the original is now. So BMW is the connection, the chain is the connection to the Second World War.
Gemini (fact check): That closes the circle to Thought #485. You told the story in Thought #399: in the museum of the Battle of Stalingrad in Volgograd there was an old Wehrmacht BMW sidecar motorcycle with the same BMW emblem the company still uses today. The word you’re looking for: the national marking on Wehrmacht vehicles was the Balkenkreuz (the straight-armed cross), often together with the unit’s tactical symbols.
One detail fits our topic exactly: the Wehrmacht’s BMW sidecar outfits, such as the R 75, didn’t run on a chain but on a shaft drive. So the connection leads straight to the drivetrain – more on that below.
Torsten: What happens if I care for the chain on the Honda Forza 750, the new model, the 2026 model, that’s the one I have, for the first time only after 10,000 km, with dry grease or what’s it called, with this dry spray? According to the AI, according to research, the chain should be cared for every 1,000 km, and personally I think that’s a bit excessive. As far as I know, because it’s the latest generation, this chain has reserves of grease stored between the links or in the links or wherever – or is it oil? Now you come in, Gemini. So my question is: how many motorcycle owners actually care for their chain every 1,000 km? That’s a huge effort. And in my view not very practical for a modern vehicle either.
Gemini (fact check): Your guess about what’s inside is right at its core. The Forza 750 has a sealed chain – the Honda manual calls it an O-ring chain. Such chains carry a permanent grease filling between pins and bushings, sealed by small rubber rings. But that filling only lubricates the inner movement of the links. On the outside, where the rollers meet the teeth of the sprockets, no inner grease reaches – and the rubber rings themselves need care to stay supple.
What happens after 10,000 km without care: the chain won’t snap because of it; the factory grease covers the first thousand kilometres. After that it runs increasingly dry: friction rises, the chain stretches faster, chain and sprockets wear out sooner. Honda itself writes that a dirty chain shortens the life of chain and sprockets through lack of lubrication and rust.
On the practical question: the Forza 750 maintenance schedule really does say “inspect and lubricate every 1,000 km”, more often in rain, dust or at full throttle. How many riders actually stick to that – I found no reliable figure. In forums many say they lube less often or have fitted an automatic chain oiler.
On dry lube (PTFE dry lubricant): it hardly flings off and keeps rim and swingarm clean, but it washes off faster in rain, so it needs shorter intervals. The maker PDL advises switching from grease to dry lube only on a new chain or one with at most 10,000 km of road use – clean greasy parts once beforehand. That’s exactly your limit. And Honda warns: only cleaners and lubricants made for O-ring chains, no steam or high-pressure cleaner, no wire brush, no petrol.
Torsten: For me the drivetrain plays a big role on a motorcycle, because it simply needs a lot of care, and there aren’t that many variants. So the classic, of course, is the chain drive, which has been the standard for decades. Then of course there are a few motorcycles that have a shaft drive. Interestingly, that included the GDR model too – oh, what was the vehicle called? What was this whole popular GDR vehicle called, from MZ, I think it was, with a drive shaft? Please look it up, I can’t think of it right now, but you’ll know. And then of course the heavy BMW machines – I think the GS, the big one, the 1200, has a shaft drive. And yes, it has many advantages over the chain drive, but it also has disadvantages, and the disadvantage is clearly that the shaft drive is very complex and above all very heavy. That’s why a belt, a toothed belt, would of course probably be even better than a chain, but modern chains are probably also very low-maintenance by now.
Gemini (fact check): The GDR motorcycle with a drive shaft is the AWO 425 from Suhl, later sold as the Simson 425 – a four-stroke single, built from 1950 to 1961. MZ in Zschopau made the two-strokes; they had a chain, but well protected in a closed chain case with rubber sleeves.
- Shaft drive (AWO 425, BMW R 1200 / 1250 / 1300 GS): hardly any care apart from changing the final-drive oil, insensitive to dirt, long-lasting – but heavier and more expensive, with noticeable reactions to throttle changes and a little more power loss.
- Toothed belt (e.g. BMW F 800 S/ST, many Harley-Davidsons): light, quiet, clean, no lubrication. For the F 800 S/ST one maintenance schedule lists a change about every 40,000 km. The belt is sensitive to small stones getting caught.
- Modern sealed chain: the compromise of low weight, high efficiency and little space – lower-maintenance than it used to be, but not maintenance-free.
Torsten: In that context I had considered first buying a vehicle that has a toothed belt and no chain, because the toothed belt is far more maintenance-free, at least in my view, maybe I’m wrong there. And so I had first considered buying the Yamaha XMAX, and I test-rode it for a weekend, three days even, and at first I was thrilled, but then I realised that the stability on the motorway can’t be compared with the Honda Forza 750, and what I really don’t like about this vehicle is that the revs are constantly high and the engine is very restless because of it. So you’re sort of constantly under pressure too, because the engine always revs high. That’s this automatic transmission, this single-gear transmission, that’s how I understand it. And of course the torque is there immediately, that’s maybe an advantage.
Gemini (fact check): Your riding impression matches the technical difference – except that the XMAX has no toothed belt but a variomatic with a V-belt (CVT). There are no fixed gears: when you open the throttle, the transmission holds the engine in a high rev range and changes the ratio via pulleys and centrifugal weights. That gives a lively pull in town, but feels restless on the motorway. The V-belt is a wear part too: on the XMAX 300, according to the Yamaha manual, an indicator flashes every 20,000 km to signal a belt change.
Your Forza 750, by contrast, has a 6-speed dual-clutch transmission (DCT), bigger wheels (17 inches front, 15 inches rear) and about 50 kg more weight – roughly 235 kg ready to ride against about 183 kg for the XMAX 300. That’s where the calm at low revs and the higher stability on the motorway come from.
Torsten: Because the wear also depends very much on where and how I ride. If I ride a lot in the city, the chain is of course put under more strain, because pulling away makes the wear higher, whereas when the speed is fairly constant, the wear is of course lower. And I rode most of the 10,000 km on the motorway above all, so at a constant speed.
Another interesting fact: when I google how long a motorcycle chain lasts, posts appear on the first page of Google, forum posts from October 24, 2016. The information on Google is older than 10 years, that’s a disaster too. Why is that?
When I now google how often do you lube your motorcycle chain, the AI says every 500 to 1,000 km, in rain every 300 km. Are you serious? I sometimes ride 300 km in one go. That means I’d have to stop and then lube my chain after 300 km. Well, I think that’s absolute overkill. Where did you get this information from, I ask myself. So at this point you can see that the AI, the algorithms, Google don’t really work properly yet.

Torsten: What I also find very telling is that the Google answers don’t distinguish at all between the different types of chain. The O-chain needs less care than the normal standard chain, and the X-chain needs even less, because it’s protected at four points and also has lubricant and has these rubber elements. But if I now search how does an X chain work, the motorcycle chain doesn’t come up at all; instead this mathematical chain comes up. So that’s very, very confusing, and that needs readjusting, by Google too. That’s why I’m sharing it here now.

Gemini (fact check): On your riding profile: constant pulling away, load changes and road dirt in the city strain chain and sprockets more than steady rolling on the motorway. That your chain spent its first 10,000 km mostly on the motorway is the best case for a late start on care. Now clean it once with a cleaner for O-ring chains, lube it fresh and check the slack: according to the Honda manual 40 to 45 mm, measured from the bottom of the swingarm to the chain; don’t ride above 50 mm. If the slack differs at different points, the chain belongs in the workshop.
Why Google shows ten-year-old forum posts: Google doesn’t disclose how it ranks in detail. What is known: since 2023 Google’s “hidden gems” system deliberately lifts first-hand experience from forums, blogs and social networks. For a question that hardly changes over the years, an old thread with many real answers therefore doesn’t automatically count as outdated.
And your screenshot shows what the AI makes of it: it says “every 500 to 1,000 kilometres” and in rain, dirt, road salt or at high speed “rather every 300 to 500 kilometres”. Only in the first bullet point does it say what’s behind it: lube soon after rides in the rain or a wash to prevent rust – so after the ride, not as a compulsory stop on the way. Next to it sit a Reddit thread from December 29, 2017 and an F650 forum. And only at the very end does the AI ask which motorcycle you ride.
On the types of chain: in principle you’re right. A standard chain without seals has no grease locked inside. On an O-ring chain a ring with a round cross-section seals against the plates at two contact surfaces; the X-ring has an X-shaped cross-section, so four sealing surfaces, and creates less friction. Makers such as DID therefore advertise a longer life – those are manufacturer figures. Two caveats: according to the Honda manual your Forza 750 has an O-ring chain, not an X-ring chain. And an X-ring chain needs lubrication on the outside too.
On the X chain: under “X-Kette” (X-chain) the web really does mostly know a Sudoku solving technique; in shops the motorcycle chain is usually called an “X-ring chain”. A person would have asked whether you mean the motorcycle chain. The AI Overview took the most common meaning and explained it very confidently.
What do you take away from this thought?
Thank you. Every answer fits – take it with you into your day. Would you like to share something yourself?
